Die- kasɛti ye fɛn jɔnjɔn ye min be se ka dɛmɛ don elekitoroniki, mobili, ani minanw dilanyɔrɔw la. A ka baarakɛcogo basigili be nɔɔ to dilanko ɲuman kan. N’an tɛ se ka fɛnw mara cogo ɲuman na, o be se ka kɛ sababu ye ka gwɛlɛyaw sɔrɔ nɔgɔman na i n’a fɔ nɔrɔli, ka nɔrɔli dɔgɔya wala ka fɛnw yɛlɛma. Lɔnniya marali ka ɲi kosɔbɛ walisa a ka se ka baara kɛ.
Environmental control is fundamental. Die-cut tape should be stored in a constant temperature and humidity environment with a temperature of 10-30°C and a relative humidity of 40%-60%. High temperatures (>35 degere ) oksidi teliya, min be na ni nɔrɔli tununi ye; funteni man bon (<5°C) can make the substrate brittle and increase the risk of delamination. Excessive humidity can cause moisture absorption in the adhesive layer, impairing lamination; excessive dryness can cause the substrate to shrink and deform. Temperature and humidity monitoring equipment is recommended to avoid extreme conditions.
O la, a ka ɲi ka kɛ ko a ka ɲi ka mara ani k’a latanga. Fɛɛn sifa caaman (i n’a fɔ PET, foam, ani non{1}}}n minw be se ka nɔrɔ ɲɔgɔn na (i n’a fɔ akriliki ni silikoni) ka kan ka mara yɔrɔ kelen na walisa ka kuruwa bali k’u bali k’u nɔrɔ ɲɔgɔn na-}. Kasɛti minw ma dayɛlɛ, u ka kan ka mara u ka pake fɔlɔ kɔnɔ walisa buguri kana u ka buguri bɔ. Die-cupi ka kan ka mara pɛtɛnin kan jimanya- kan min tɛ se ka kɛ. I yɛrɛ tanga a ka yɛlɛma wala k’a bila fɛɛn girinmanw na walisa a kana nɔrɔ wala ka nɔrɔnan wala kɔfɛla nɔrɔnan tigɛ.
A fɔlɔ-inin -}seri sariya man kan ka jate. Aw ka baara kɛ ni dilan loon ye walisa ka fɛnw hakɛ dɔgɔya. A ka ca a la, die- kasɛti min be sɔrɔ, o ye kalo 6-12 ye (ka kɛɲɛ ni dilanbaga ka sariyaw ye). Kaseti min be ni kasɛti ye, o ka kan ka sɛgɛsɛgɛ tugun walisa ka nɔrɔ ani ka yecogo kɛ ka sɔrɔ ka baara kɛ n’a ye.
Lamini marali gɛlɛn sababu la, latangali tilannin, ani fɛnw kɔlɔsili, an be se ka dɔ fara a kan, min be sɔrɔ di-cupe kan ani ka baarakɛcogo ɲuman ni lafiyaman sabati.
